Three Revit plugins from Monso MEP Engineering UK Ltd size UK heat networks, domestic water and gas pipework to British standards, with calculation reports taken from the model.
The MUK plugins are now on the Autodesk App Store, with the current listings dated 16 November. They cover Revit 2022 to 2027. Each is an annual subscription with a 30-day trial, billed through an Autodesk account.
Why it matters for designers
A lot of UK heat network, water and gas sizing still happens in a spreadsheet, then the results are typed back into Revit. Plugins that read the model and write a report cut that double handling, especially on residential schemes with many HIUs. Before you rely on them for issue, run a past project through your usual method and check which edition of each standard the tool applies.
Has anyone compared MUK HIU or MUK GAS against their own spreadsheet calculations yet?
Russian version: https://bim3d.org/threads/monso-mep...h-setej-vody-i-gaza-po-britanskim-normam.413/
The MUK plugins are now on the Autodesk App Store, with the current listings dated 16 November. They cover Revit 2022 to 2027. Each is an annual subscription with a 30-day trial, billed through an Autodesk account.
MUK GAS pipe loss map in Revit
MUK GAS loss map in Revit, with pipework coloured by pressure loss and a results table.
English...
English...
- MUK HIU ($299/year) sizes LTHW pipework from the plant room to each heat interface unit using CIBSE and DS 439 diversity, and gives an index circuit, pump duty, a loss map and a PDF report.
- MUK BCWS ($64.99/year) applies the BS EN 806-3 loading-unit diversity curve inside Revit's own pipe calculations, instead of the US Hunter curve.
- MUK GAS ($130/year) sizes natural gas and LPG pipework to BS 6891 for domestic work and IGEM/UP/2 for commercial work, with a critical path, a loss map and a PDF report.
Why it matters for designers
A lot of UK heat network, water and gas sizing still happens in a spreadsheet, then the results are typed back into Revit. Plugins that read the model and write a report cut that double handling, especially on residential schemes with many HIUs. Before you rely on them for issue, run a past project through your usual method and check which edition of each standard the tool applies.
Has anyone compared MUK HIU or MUK GAS against their own spreadsheet calculations yet?
Russian version: https://bim3d.org/threads/monso-mep...h-setej-vody-i-gaza-po-britanskim-normam.413/
Last edited:
