• Stuck on a MagiCAD or Revit model? Ask engineers who design heating, ventilation, plumbing and electrical systems every day. Members can post questions, attach screenshots and project files, and get notified when someone replies.

    Застряли с моделью в MagiCAD или Revit? Спросите инженеров, которые каждый день проектируют отопление, вентиляцию, водопровод и электрику. После регистрации можно задавать вопросы, прикладывать скриншоты и файлы и получать уведомления об ответах.

    Join free / Регистрация
    1 minute · free / 1 минута · бесплатно

MEP Engineering Mitsubishi Electric Launches The Little One, a Compact R290 Ecodan Heat Pump for New Homes

Mitsubishi Electric has announced The Little One, a compact Ecodan R290 air-to-water heat pump for new UK homes, due on sale in 2027.

Mitsubishi Electric is adding a smaller outdoor unit to the Ecodan range, aimed squarely at housebuilders getting ready for the Future Homes Standard.


  • Two sizes, 4 kW and 6 kW, both on R290 and both rated A+++.
  • 970 x 713 x 400 mm and 58 kg: 47% smaller and 40% lighter than its Ecodan sibling.
  • SCOP at 35°C flow: 4.77 for the 4 kW model, 4.65 for the 6 kW.
  • Sound power 49 dB(A) and 51 dB(A), helped by the patented "Bossless" fan design.
  • An odorant added to the R290 charge removes the need for a protective zone around the unit.
  • Mitsubishi says it costs less than its current R32 and R290 units, but no prices yet.

What it means for designers
The interesting part is not the size but the dropped protective zone. On tight new-build plots the R290 clearance rules often decide where the unit can go, so if this holds up with building control it changes layouts, not just the equipment schedule. A 4 kW unit also only makes sense when the heat loss is honestly calculated, which is the same sizing discipline discussed in the thread on ACCA Manual J and Manual S updates. And low-energy homes with small heat pumps bring their own summer problems, as the CIBSE and Passivhaus Trust cooling guidance thread shows.

Would you place an R290 unit closer to windows and doors if the protective zone really goes away?

Russian version: https://bim3d.org/threads/490/
 
Last edited:
Back
Top